4. Generic flow API - examples

This document demonstrates some concrete examples for programming flow rules with the rte_flow APIs.

4.1. Simple IPv4 drop

4.1.1. Description

In this example we will create a simple rule that drops packets whose IPv4 destination equals 192.168.3.2. This code is equivalent to the following testpmd command (wrapped for clarity):

testpmd> flow create 0 ingress pattern eth / vlan /
                  ipv4 dst is 192.168.3.2 / end actions drop / end

4.1.2. Code

/* create the attribute structure */
struct rte_flow_attr attr = { .ingress = 1 };
struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
struct rte_flow_item_eth eth;
struct rte_flow_item_vlan vlan;
struct rte_flow_item_ipv4 ipv4;
struct rte_flow *flow;
struct rte_flow_error error;

/* setting the eth to pass all packets */
pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
pattern[0].spec = ð

/* set the vlan to pass all packets */
pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
pattern[1].spec = &vlan;

/* set the dst ipv4 packet to the required value */
ipv4.hdr.dst_addr = htonl(0xc0a80302);
pattern[2].type = RTE_FLOW_ITEM_TYPE_IPV4;
pattern[2].spec = &ipv4;

/* end the pattern array */
pattern[3].type = RTE_FLOW_ITEM_TYPE_END;

/* create the drop action */
actions[0].type = RTE_FLOW_ACTION_TYPE_DROP;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;

/* validate and create the flow rule */
if (!rte_flow_validate(port_id, &attr, pattern, actions, &error))
    flow = rte_flow_create(port_id, &attr, pattern, actions, &error);

4.1.3. Output

Terminal 1: running sample app with the flow rule disabled:

./filter-program disable
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.4
received packet with src ip = 176.80.50.5

Terminal 1: running sample the app flow rule enabled:

./filter-program enabled
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'),  \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst ='192.168.3.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.4

4.2. Range IPv4 drop

4.2.1. Description

In this example we will create a simple rule that drops packets whose IPv4 destination is in the range 192.168.3.0 to 192.168.3.255. This is done using a mask.

This code is equivalent to the following testpmd command (wrapped for clarity):

testpmd> flow create 0 ingress pattern eth / vlan /
                  ipv4 dst spec 192.168.3.0 dst mask 255.255.255.0 /
                  end actions drop / end

4.2.2. Code

struct rte_flow_attr attr = {.ingress = 1};
struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
struct rte_flow_item_eth eth;
struct rte_flow_item_vlan vlan;
struct rte_flow_item_ipv4 ipv4;
struct rte_flow_item_ipv4 ipv4_mask;
struct rte_flow *flow;
struct rte_flow_error error;

/* setting the eth to pass all packets */
pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
pattern[0].spec = ð

/* set the vlan to pass all packets */
pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
pattern[1].spec = &vlan;

/* set the dst ipv4 packet to the required value */
ipv4.hdr.dst_addr = htonl(0xc0a80300);
ipv4_mask.hdr.dst_addr = htonl(0xffffff00);
pattern[2].type = RTE_FLOW_ITEM_TYPE_IPV4;
pattern[2].spec = &ipv4;
pattern[2].mask = &ipv4_mask;

/* end the pattern array */
pattern[3].type = RTE_FLOW_ITEM_TYPE_END;

/* create the drop action */
actions[0].type = RTE_FLOW_ACTION_TYPE_DROP;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;

/* validate and create the flow rule */
if (!rte_flow_validate(port_id, &attr, pattern, actions, &error))
    flow = rte_flow_create(port_id, &attr, pattern, actions, &error);

4.2.3. Output

Terminal 1: running sample app flow rule disabled:

./filter-program disable
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.6', dst='192.168.5.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.4
received packet with src ip = 176.80.50.5
received packet with src ip = 176.80.50.6

Terminal 1: running sample app flow rule enabled:

./filter-program enabled
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q()/IP(src='176.80.50.6', dst='192.168.5.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.6

4.3. Send vlan to queue

4.3.1. Description

In this example we will create a rule that routes all vlan id 123 to queue 3.

This code is equivalent to the following testpmd command (wrapped for clarity):

testpmd> flow create 0 ingress pattern eth / vlan vid spec 123 /
                  end actions queue index 3 / end

4.3.2. Code

struct rte_flow_attr attr = { .ingress = 1 };
struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
struct rte_flow_item_eth eth;
struct rte_flow_item_vlan vlan;
struct rte_flow_action_queue queue = { .index = 3 };
struct rte_flow *flow;
struct rte_flow_error error;

/* setting the eth to pass all packets */
pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
pattern[0].spec = ð

/* set the vlan to pas all packets */
vlan.vid = 123;
pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
pattern[1].spec = &vlan;

/* end the pattern array */
pattern[2].type = RTE_FLOW_ITEM_TYPE_END;

/* create the queue action */
actions[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
actions[0].conf = &queue;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;

/* validate and create the flow rule */
if (!rte_flow_validate(port_id, &attr, pattern, actions, &error))
    flow = rte_flow_create(port_id, &attr, pattern, actions, &error);

4.3.3. Output

Terminal 1: running sample app flow rule disabled:

./filter-program disable
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.4', dst='192.168.3.1'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q(vlan=50)/IP(src='176.80.50.5', dst='192.168.3.2'),  \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.6', dst='192.168.5.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.4 sent to queue 2
received packet with src ip = 176.80.50.5 sent to queue 1
received packet with src ip = 176.80.50.6 sent to queue 0

Terminal 1: running sample app flow rule enabled:

./filter-program enabled
[waiting for packets]

Terminal 2: running scapy:

$scapy
welcome to Scapy
>> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.4', dst='192.168.3.1'), \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q(vlan=50)/IP(src='176.80.50.5', dst='192.168.3.2'),  \
         iface='some interface', count=1)
>> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.6', dst='192.168.5.2'), \
         iface='some interface', count=1)

Terminal 1: output log:

received packet with src ip = 176.80.50.4 sent to queue 3
received packet with src ip = 176.80.50.5 sent to queue 1
received packet with src ip = 176.80.50.6 sent to queue 3