.. SPDX-License-Identifier: BSD-3-Clause Copyright(c) 2016 Intel Corporation. Live Migration of VM with Virtio on host running vhost_user =========================================================== Overview -------- Live Migration of a VM with DPDK Virtio PMD on a host which is running the Vhost sample application (vhost-switch) and using the DPDK PMD (ixgbe or i40e). The Vhost sample application uses VMDQ so SRIOV must be disabled on the NIC's. The following sections show an example of how to do this migration. Test Setup ---------- To test the Live Migration two servers with identical operating systems installed are used. KVM and QEMU is also required on the servers. QEMU 2.5 is required for Live Migration of a VM with vhost_user running on the hosts. In this example, the servers have Niantic and or Fortville NIC's installed. The NIC's on both servers are connected to a switch which is also connected to the traffic generator. The switch is configured to broadcast traffic on all the NIC ports. The ip address of host_server_1 is 10.237.212.46 The ip address of host_server_2 is 10.237.212.131 .. _figure_lm_vhost_user: .. figure:: img/lm_vhost_user.* Live Migration steps -------------------- The sample scripts mentioned in the steps below can be found in the :ref:`Sample host scripts ` and :ref:`Sample VM scripts ` sections. On host_server_1: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Setup DPDK on host_server_1 .. code-block:: console cd /root/dpdk/host_scripts ./setup_dpdk_on_host.sh On host_server_1: Terminal 2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Bind the Niantic or Fortville NIC to igb_uio on host_server_1. For Fortville NIC. .. code-block:: console cd /root/dpdk/usertools ./dpdk-devbind.py -b igb_uio 0000:02:00.0 For Niantic NIC. .. code-block:: console cd /root/dpdk/usertools ./dpdk-devbind.py -b igb_uio 0000:09:00.0 On host_server_1: Terminal 3 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For Fortville and Niantic NIC's reset SRIOV and run the vhost_user sample application (vhost-switch) on host_server_1. .. code-block:: console cd /root/dpdk/host_scripts ./reset_vf_on_212_46.sh ./run_vhost_switch_on_host.sh On host_server_1: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start the VM on host_server_1 .. code-block:: console ./vm_virtio_vhost_user.sh On host_server_1: Terminal 4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Connect to the QEMU monitor on host_server_1. .. code-block:: console cd /root/dpdk/host_scripts ./connect_to_qemu_mon_on_host.sh (qemu) On host_server_1: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ **In VM on host_server_1:** Setup DPDK in the VM and run testpmd in the VM. .. code-block:: console cd /root/dpdk/vm_scripts ./setup_dpdk_in_vm.sh ./run_testpmd_in_vm.sh testpmd> show port info all testpmd> set fwd mac retry testpmd> start tx_first testpmd> show port stats all Virtio traffic is seen at P1 and P2. On host_server_2: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Set up DPDK on the host_server_2. .. code-block:: console cd /root/dpdk/host_scripts ./setup_dpdk_on_host.sh On host_server_2: Terminal 2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Bind the Niantic or Fortville NIC to igb_uio on host_server_2. For Fortville NIC. .. code-block:: console cd /root/dpdk/usertools ./dpdk-devbind.py -b igb_uio 0000:03:00.0 For Niantic NIC. .. code-block:: console cd /root/dpdk/usertools ./dpdk-devbind.py -b igb_uio 0000:06:00.0 On host_server_2: Terminal 3 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For Fortville and Niantic NIC's reset SRIOV, and run the vhost_user sample application on host_server_2. .. code-block:: console cd /root/dpdk/host_scripts ./reset_vf_on_212_131.sh ./run_vhost_switch_on_host.sh On host_server_2: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Start the VM on host_server_2. .. code-block:: console ./vm_virtio_vhost_user_migrate.sh On host_server_2: Terminal 4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Connect to the QEMU monitor on host_server_2. .. code-block:: console cd /root/dpdk/host_scripts ./connect_to_qemu_mon_on_host.sh (qemu) info status VM status: paused (inmigrate) (qemu) On host_server_1: Terminal 4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Check that switch is up before migrating the VM. .. code-block:: console (qemu) migrate tcp:10.237.212.131:5555 (qemu) info status VM status: paused (postmigrate) (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off Migration status: completed total time: 11619 milliseconds downtime: 5 milliseconds setup: 7 milliseconds transferred ram: 379699 kbytes throughput: 267.82 mbps remaining ram: 0 kbytes total ram: 1590088 kbytes duplicate: 303985 pages skipped: 0 pages normal: 94073 pages normal bytes: 376292 kbytes dirty sync count: 2 (qemu) quit On host_server_2: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ **In VM on host_server_2:** Hit Enter key. This brings the user to the testpmd prompt. .. code-block:: console testpmd> On host_server_2: Terminal 4 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ **In QEMU monitor on host_server_2** .. code-block:: console (qemu) info status VM status: running On host_server_2: Terminal 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ **In VM on host_server_2:** .. code-block:: console testpmd> show port info all testpmd> show port stats all Virtio traffic is seen at P0 and P1. .. _lm_virtio_vhost_user_host_scripts: Sample host scripts ------------------- reset_vf_on_212_46.sh ~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #!/bin/sh # This script is run on the host 10.237.212.46 to reset SRIOV # BDF for Fortville NIC is 0000:02:00.0 cat /sys/bus/pci/devices/0000\:02\:00.0/max_vfs echo 0 > /sys/bus/pci/devices/0000\:02\:00.0/max_vfs cat /sys/bus/pci/devices/0000\:02\:00.0/max_vfs # BDF for Niantic NIC is 0000:09:00.0 cat /sys/bus/pci/devices/0000\:09\:00.0/max_vfs echo 0 > /sys/bus/pci/devices/0000\:09\:00.0/max_vfs cat /sys/bus/pci/devices/0000\:09\:00.0/max_vfs vm_virtio_vhost_user.sh ~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #/bin/sh # Script for use with vhost_user sample application # The host system has 8 cpu's (0-7) # Path to KVM tool KVM_PATH="/usr/bin/qemu-system-x86_64" # Guest Disk image DISK_IMG="/home/user/disk_image/virt1_sml.disk" # Number of guest cpus VCPUS_NR="6" # Memory MEM=1024 VIRTIO_OPTIONS="csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off" # Socket Path SOCKET_PATH="/root/dpdk/host_scripts/usvhost" taskset -c 2-7 $KVM_PATH \ -enable-kvm \ -m $MEM \ -smp $VCPUS_NR \ -object memory-backend-file,id=mem,size=1024M,mem-path=/mnt/huge,share=on \ -numa node,memdev=mem,nodeid=0 \ -cpu host \ -name VM1 \ -no-reboot \ -net none \ -vnc none \ -nographic \ -hda $DISK_IMG \ -chardev socket,id=chr0,path=$SOCKET_PATH \ -netdev type=vhost-user,id=net1,chardev=chr0,vhostforce \ -device virtio-net-pci,netdev=net1,mac=CC:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ -chardev socket,id=chr1,path=$SOCKET_PATH \ -netdev type=vhost-user,id=net2,chardev=chr1,vhostforce \ -device virtio-net-pci,netdev=net2,mac=DD:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ -monitor telnet::3333,server,nowait connect_to_qemu_mon_on_host.sh ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #!/bin/sh # This script is run on both hosts when the VM is up, # to connect to the Qemu Monitor. telnet 0 3333 reset_vf_on_212_131.sh ~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #!/bin/sh # This script is run on the host 10.237.212.131 to reset SRIOV # BDF for Niantic NIC is 0000:06:00.0 cat /sys/bus/pci/devices/0000\:06\:00.0/max_vfs echo 0 > /sys/bus/pci/devices/0000\:06\:00.0/max_vfs cat /sys/bus/pci/devices/0000\:06\:00.0/max_vfs # BDF for Fortville NIC is 0000:03:00.0 cat /sys/bus/pci/devices/0000\:03\:00.0/max_vfs echo 0 > /sys/bus/pci/devices/0000\:03\:00.0/max_vfs cat /sys/bus/pci/devices/0000\:03\:00.0/max_vfs vm_virtio_vhost_user_migrate.sh ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #/bin/sh # Script for use with vhost user sample application # The host system has 8 cpu's (0-7) # Path to KVM tool KVM_PATH="/usr/bin/qemu-system-x86_64" # Guest Disk image DISK_IMG="/home/user/disk_image/virt1_sml.disk" # Number of guest cpus VCPUS_NR="6" # Memory MEM=1024 VIRTIO_OPTIONS="csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off" # Socket Path SOCKET_PATH="/root/dpdk/host_scripts/usvhost" taskset -c 2-7 $KVM_PATH \ -enable-kvm \ -m $MEM \ -smp $VCPUS_NR \ -object memory-backend-file,id=mem,size=1024M,mem-path=/mnt/huge,share=on \ -numa node,memdev=mem,nodeid=0 \ -cpu host \ -name VM1 \ -no-reboot \ -net none \ -vnc none \ -nographic \ -hda $DISK_IMG \ -chardev socket,id=chr0,path=$SOCKET_PATH \ -netdev type=vhost-user,id=net1,chardev=chr0,vhostforce \ -device virtio-net-pci,netdev=net1,mac=CC:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ -chardev socket,id=chr1,path=$SOCKET_PATH \ -netdev type=vhost-user,id=net2,chardev=chr1,vhostforce \ -device virtio-net-pci,netdev=net2,mac=DD:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ -incoming tcp:0:5555 \ -monitor telnet::3333,server,nowait .. _lm_virtio_vhost_user_vm_scripts: Sample VM scripts ----------------- setup_dpdk_virtio_in_vm.sh ~~~~~~~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #!/bin/sh # this script matches the vm_virtio_vhost_user script # virtio port is 03 # virtio port is 04 /root/dpdk/usertools/dpdk-hugepages.py --show /root/dpdk/usertools/dpdk-hugepages.py --setup 2G /root/dpdk/usertools/dpdk-hugepages.py --show ifconfig -a /root/dpdk/usertools/dpdk-devbind.py --status rmmod virtio-pci modprobe uio insmod igb_uio.ko /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:03.0 /root/dpdk/usertools/dpdk-devbind.py -b igb_uio 0000:00:04.0 /root/dpdk/usertools/dpdk-devbind.py --status run_testpmd_in_vm.sh ~~~~~~~~~~~~~~~~~~~~ .. code-block:: sh #!/bin/sh # Run testpmd for use with vhost_user sample app. # test system has 8 cpus (0-7), use cpus 2-7 for VM /root/dpdk//app/dpdk-testpmd \ -l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i