.. SPDX-License-Identifier: BSD-3-Clause Copyright 2018 The DPDK contributors DPDK Release 19.02 ================== .. **Read this first.** The text in the sections below explains how to update the release notes. Use proper spelling, capitalization and punctuation in all sections. Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. Build the docs and view the output file to ensure the changes are correct:: make doc-guides-html xdg-open build/doc/html/guides/rel_notes/release_19_02.html New Features ------------ .. This section should contain new features added in this release. Sample format: * **Add a title in the past tense with a full stop.** Add a short 1-2 sentence description in the past tense. The description should be enough to allow someone scanning the release notes to understand the new feature. If the feature adds a lot of sub-features you can use a bullet list like this: * Added feature foo to do something. * Enhanced feature bar to do something else. Refer to the previous release notes for examples. Suggested order in release notes items: * Core libs (EAL, mempool, ring, mbuf, buses) * Device abstraction libs and PMDs - ethdev (lib, PMDs) - cryptodev (lib, PMDs) - eventdev (lib, PMDs) - etc * Other libs * Apps, Examples, Tools (if significant) This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * **Added support for freeing hugepages exactly as originally allocated.** Some applications using memory event callbacks (especially for managing RDMA memory regions) require that memory be freed back to the system exactly as it was originally allocated. These applications typically also require that a malloc allocation not span across two separate hugepage allocations. A new ``--match-allocations`` EAL init flag has been added to fulfill both of these requirements. * **Added API to register external memory in DPDK.** A new ``rte_extmem_register``/``rte_extmem_unregister`` API was added to allow chunks of external memory to be registered with DPDK without adding them to the malloc heap. * **Added support for using virtio-user without hugepages.** The ``--no-huge`` mode was augmented to use memfd-backed memory (on systems that support memfd), to allow using virtio-user-based NICs without hugepages. * **Release of the ENA PMD v2.0.0.** Version 2.0.0 of the ENA PMD was added with the following additions: * Added Low Latency Queue v2 (LLQv2). This feature reduces the latency of the packets by pushing the header directly through the PCI to the device. This allows the NIC to start handle packets right after the doorbell without waiting for DMA. * Added independent configuration of HW Tx and Rx ring depths. * Added support for up to 8k Rx descriptors per ring. * Added additional doorbell check on Tx, to handle Tx more efficiently for big bursts of packets. * Added per queue statistics. * Added extended statistics using xstats DPDK API. * The reset routine was aligned with the DPDK API, so now it can be handled as in other PMDs. * Fixed out of order (OOO) completion. * Fixed memory leaks due to port stops and starts in the middle of traffic. * Updated documentation and features list of the PMD. * **Updated mlx5 driver.** Updated the mlx5 driver including the following changes: * Fixed ``imissed`` counter to be reported through ``rte_eth_stats`` instead of ``rte_eth_xstats``. * Added packet header modification through Direct Verbs flow driver. * Added ConnectX-6 PCI device ID to be proved by ``mlx5`` driver. * Added flow counter support to Direct Verbs flow driver though DevX. * Renamed build options for the glue layer to ``CONFIG_RTE_IBVERBS_LINK_DLOPEN`` for make and ``ibverbs_link`` for meson. * Added static linkage of ``mlx`` dependency. * Improved stability of E-Switch flow driver. * Added new make build configuration to set the cacheline size for BlueField correctly - ``arm64-bluefield-linux-gcc``. * **Updated the enic driver.** * Added support for the ``RTE_ETH_DEV_CLOSE_REMOVE`` flag. * Added a handler to get the firmware version string. * Added support for multicast filtering. * **Added dynamic queues allocation support for i40e VF.** Previously, the available VF queues were reserved by PF at initialization stage. Now both DPDK PF and Kernel PF (>=2.1.14) will support dynamic queue allocation. At runtime, when VF requests for more queue exceed the initial reserved amount, the PF can allocate up to 16 queues as the request after a VF reset. * **Added ICE net PMD.** Added the new ``ice`` net driver for Intel(R) Ethernet Network Adapters E810. See the :doc:`../nics/ice` NIC guide for more details on this new driver. * **Added support for SW-assisted VDPA live migration.** This SW-assisted VDPA live migration facility helps VDPA devices without logging capability to perform live migration, a mediated SW relay can help devices to track dirty pages caused by DMA. the IFC driver has enabled this SW-assisted live migration mode. * **Added security checks to the cryptodev symmetric session operations.** Added a set of security checks to the access cryptodev symmetric session. The checks include the session's user data read/write check and the session private data referencing status check while freeing a session. * **Updated the AESNI-MB PMD.** * Added support for intel-ipsec-mb version 0.52. * Added AES-GMAC algorithm support. * Added Plain SHA1, SHA224, SHA256, SHA384, and SHA512 algorithms support. * **Added IPsec Library.** Added an experimental library ``librte_ipsec`` to provide ESP tunnel and transport support for IPv4 and IPv6 packets. The library provides support for AES-CBC ciphering and AES-CBC with HMAC-SHA1 algorithm-chaining, and AES-GCM and NULL algorithms only at present. It is planned to add more algorithms in future releases. See :doc:`../prog_guide/ipsec_lib` for more information. * **Updated the ipsec-secgw sample application.** The ``ipsec-secgw`` sample application has been updated to use the new ``librte_ipsec`` library, which has also been added in this release. The original functionality of ipsec-secgw is retained, a new command line parameter ``-l`` has been added to ipsec-secgw to use the IPsec library, instead of the existing IPsec code in the application. The IPsec library does not support all the functionality of the existing ipsec-secgw application. It is planned to add the outstanding functionality in future releases. See :doc:`../sample_app_ug/ipsec_secgw` for more information. * **Enabled checksum support in the ISA-L compressdev driver.** Added support for both adler and crc32 checksums in the ISA-L PMD. This aids data integrity across both compression and decompression. * **Added a compression performance test tool.** Added a new performance test tool to test the compressdev PMD. The tool tests compression ratio and compression throughput. * **Added intel_pstate support to Power Management library.** Previously, using the power management library required the disabling of the intel_pstate kernel driver, and the enabling of the acpi_cpufreq kernel driver. This is no longer the case, as the use of the intel_pstate kernel driver is now supported, and automatically detected by the library. API Changes ----------- .. This section should contain API changes. Sample format: * sample: Add a short 1-2 sentence description of the API change which was announced in the previous releases and made in this release. Start with a scope label like "ethdev:". Use fixed width quotes for ``function_names`` or ``struct_names``. Use the past tense. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * eal: Function ``rte_bsf64`` in ``rte_bitmap.h`` has been renamed to ``rte_bsf64_safe`` and moved to ``rte_common.h``. A new ``rte_bsf64`` function has been added in ``rte_common.h`` that follows the convention set by the existing ``rte_bsf32`` function. * eal: Segment fd API on Linux now sets error code to ``ENOTSUP`` in more cases where segment the fd API is not expected to be supported: - On attempt to get a segment fd for an externally allocated memory segment - In cases where memfd support would have been required to provide segment fds (such as in-memory or no-huge mode) * eal: Functions ``rte_malloc_dump_stats()``, ``rte_malloc_dump_heaps()`` and ``rte_malloc_get_socket_stats()`` are no longer safe to call concurrently with ``rte_malloc_heap_create()`` or ``rte_malloc_heap_destroy()`` function calls. * mbuf: ``RTE_MBUF_INDIRECT()``, which was deprecated in 18.05, was replaced with ``RTE_MBUF_CLONED()`` and removed in 19.02. * sched: As result of the new format of the mbuf sched field, the functions ``rte_sched_port_pkt_write()`` and ``rte_sched_port_pkt_read_tree_path()`` got an additional parameter of type ``struct rte_sched_port``. * pdump: The ``rte_pdump_set_socket_dir()``, the parameter ``path`` of ``rte_pdump_init()`` and enum ``rte_pdump_socktype`` were deprecated since 18.05 and are removed in this release. * cryptodev: The parameter ``session_pool`` in the function ``rte_cryptodev_queue_pair_setup()`` is removed. * cryptodev: a new function ``rte_cryptodev_sym_session_pool_create()`` has been introduced. This function is now mandatory when creating symmetric session header mempool. Please note all crypto applications are required to use this function from now on. Failed to do so will cause a ``rte_cryptodev_sym_session_create()`` function call return error. ABI Changes ----------- .. This section should contain ABI changes. Sample format: * sample: Add a short 1-2 sentence description of the ABI change which was announced in the previous releases and made in this release. Start with a scope label like "ethdev:". Use fixed width quotes for ``function_names`` or ``struct_names``. Use the past tense. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * mbuf: The format of the sched field of ``rte_mbuf`` has been changed to include the following fields: ``queue ID``, ``traffic class``, ``color``. * cryptodev: as shown in the 18.11 deprecation notice, the structure ``rte_cryptodev_qp_conf`` has added two parameters for symmetric session mempool and symmetric session private data mempool. * cryptodev: as shown in the 18.11 deprecation notice, the structure ``rte_cryptodev_sym_session`` has been updated to contain more information to ensure safely accessing the session and session private data. * security: A new field ``uint64_t opaque_data`` has been added to ``rte_security_session`` structure. That would allow upper layer to easily associate/de-associate some user defined data with the security session. Shared Library Versions ----------------------- .. Update any library version updated in this release and prepend with a ``+`` sign, like this: libfoo.so.1 + libupdated.so.2 libbar.so.1 This section is a comment. Do not overwrite or remove it. ========================================================= The libraries prepended with a plus sign were incremented in this version. .. code-block:: diff librte_acl.so.2 librte_bbdev.so.1 librte_bitratestats.so.2 librte_bpf.so.1 librte_bus_dpaa.so.2 librte_bus_fslmc.so.2 librte_bus_ifpga.so.2 librte_bus_pci.so.2 librte_bus_vdev.so.2 librte_bus_vmbus.so.2 librte_cfgfile.so.2 librte_cmdline.so.2 librte_compressdev.so.1 + librte_cryptodev.so.6 librte_distributor.so.1 librte_eal.so.9 librte_efd.so.1 librte_ethdev.so.11 librte_eventdev.so.6 librte_flow_classify.so.1 librte_gro.so.1 librte_gso.so.1 librte_hash.so.2 librte_ip_frag.so.1 librte_jobstats.so.1 librte_kni.so.2 librte_kvargs.so.1 librte_latencystats.so.1 librte_lpm.so.2 + librte_mbuf.so.5 librte_member.so.1 librte_mempool.so.5 librte_meter.so.2 librte_metrics.so.1 librte_net.so.1 librte_pci.so.1 + librte_pdump.so.3 librte_pipeline.so.3 librte_pmd_bnxt.so.2 librte_pmd_bond.so.2 librte_pmd_i40e.so.2 librte_pmd_ixgbe.so.2 librte_pmd_dpaa2_qdma.so.1 librte_pmd_ring.so.2 librte_pmd_softnic.so.1 librte_pmd_vhost.so.2 librte_port.so.3 librte_power.so.1 librte_rawdev.so.1 librte_reorder.so.1 librte_ring.so.2 + librte_sched.so.2 + librte_security.so.2 librte_table.so.3 librte_timer.so.1 librte_vhost.so.4 Known Issues ------------ .. This section should contain new known issues in this release. Sample format: * **Add title in present tense with full stop.** Add a short 1-2 sentence description of the known issue in the present tense. Add information on any known workarounds. This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * ``AVX-512`` support has been disabled for ``GCC`` builds when ``binutils 2.30`` is detected [1] because of a crash [2]. This can affect ``native`` machine type build targets on the platforms that support ``AVX512F`` like ``Intel Skylake`` processors, and can cause a possible performance drop. The immediate workaround is to use ``clang`` compiler on these platforms. Initial workaround in DPDK v18.11 was to disable ``AVX-512`` support for ``GCC`` completely, but based on information on defect submitted to GCC community [3], issue has been identified as ``binutils 2.30`` issue. Since currently only GCC generates ``AVX-512`` instructions, the scope is limited to ``GCC`` and ``binutils 2.30`` - [1]: Commit ("mk: fix scope of disabling AVX512F support") - [2]: https://bugs.dpdk.org/show_bug.cgi?id=97 - [3]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096 Tested Platforms ---------------- .. This section should contain a list of platforms that were tested with this release. The format is: * platform with combinations * List of CPU * List of OS * List of devices * Other relevant details... This section is a comment. Do not overwrite or remove it. Also, make sure to start the actual text at the margin. ========================================================= * Intel(R) platforms with Intel(R) NICs combinations * CPU * Intel(R) Atom(TM) CPU C3758 @ 2.20GHz * Intel(R) Xeon(R) CPU D-1541 @ 2.10GHz * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz * Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz * Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz * Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz * OS: * CentOS 7.4 * CentOS 7.5 * Fedora 25 * Fedora 28 * FreeBSD 11.2 * FreeBSD 12.0 * Red Hat Enterprise Linux Server release 7.4 * Red Hat Enterprise Linux Server release 7.5 * Open SUSE 15 * Wind River Linux 8 * Ubuntu 14.04 * Ubuntu 16.04 * Ubuntu 16.10 * Ubuntu 18.04 * Ubuntu 18.10 * NICs: * Intel(R) 82599ES 10 Gigabit Ethernet Controller * Firmware version: 0x61bf0001 * Device id (pf/vf): 8086:10fb / 8086:10ed * Driver version: 5.2.3 (ixgbe) * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T * Firmware version: 0x800003e7 * Device id (pf/vf): 8086:15ad / 8086:15a8 * Driver version: 4.4.6 (ixgbe) * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G) * Firmware version: 6.80 0x80003cc1 * Device id (pf/vf): 8086:1572 / 8086:154c * Driver version: 2.7.26 (i40e) * Intel(R) Corporation Ethernet Connection X722 for 10GbE SFP+ (4x10G) * Firmware version: 3.33 0x80000fd5 0.0.0 * Device id (pf/vf): 8086:37d0 / 8086:37cd * Driver version: 2.7.26 (i40e) * Intel(R) Ethernet Converged Network Adapter XXV710-DA2 (2x25G) * Firmware version: 6.80 0x80003d05 * Device id (pf/vf): 8086:158b / 8086:154c * Driver version: 2.7.26 (i40e) * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G) * Firmware version: 6.80 0x80003cfb * Device id (pf/vf): 8086:1583 / 8086:154c * Driver version: 2.7.26 (i40e) * Intel(R) Corporation I350 Gigabit Network Connection * Firmware version: 1.63, 0x80000dda * Device id (pf/vf): 8086:1521 / 8086:1520 * Driver version: 5.4.0-k (igb) * Intel(R) platforms with Mellanox(R) NICs combinations * CPU: * Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz * Intel(R) Xeon(R) CPU E5-2650 v4 @ 2.20GHz * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz * Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz * OS: * Red Hat Enterprise Linux Server release 7.6 (Maipo) * Red Hat Enterprise Linux Server release 7.5 (Maipo) * Red Hat Enterprise Linux Server release 7.4 (Maipo) * Red Hat Enterprise Linux Server release 7.3 (Maipo) * Red Hat Enterprise Linux Server release 7.2 (Maipo) * Ubuntu 18.10 * Ubuntu 18.04 * Ubuntu 17.10 * Ubuntu 16.04 * SUSE Linux Enterprise Server 15 * MLNX_OFED: 4.4-2.0.1.0 * MLNX_OFED: 4.5-1.0.1.0 * NICs: * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1007 * Firmware version: 2.42.5000 * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1013 * Firmware version: 12.24.1000 and above * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.24.1000 and above * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.24.1000 and above * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1017 * Firmware version: 16.24.1000 and above * Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G) * Host interface: PCI Express 4.0 x16 * Device ID: 15b3:1019 * Firmware version: 16.24.1000 and above * ARM platforms with Mellanox(R) NICs combinations * CPU: * Qualcomm ARM 1.1 2500MHz * OS: * Red Hat Enterprise Linux Server release 7.5 (Maipo) * NICs: * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) * Host interface: PCI Express 3.0 x8 * Device ID: 15b3:1015 * Firmware version: 14.24.0220 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1017 * Firmware version: 16.24.0220 * Mellanox(R) BlueField SmartNIC * Mellanox(R) BlueField SmartNIC MT416842 (2x25G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:a2d2 * Firmware version: 18.24.0328 * SoC ARM cores running OS: * CentOS Linux release 7.4.1708 (AltArch) * MLNX_OFED 4.4-2.5.9.0 * DPDK application running on ARM cores inside SmartNIC * Power 9 platforms with Mellanox(R) NICs combinations * CPU: * POWER9 2.2 (pvr 004e 1202) 2300MHz * OS: * Ubuntu 18.04.1 LTS (Bionic Beaver) * NICs: * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) * Host interface: PCI Express 3.0 x16 * Device ID: 15b3:1017 * Firmware version: 16.23.1020 * OFED: * MLNX_OFED_LINUX-4.5-1.0.1.0