9. SNOW 3G Crypto Poll Mode Driver

The SNOW 3G PMD (librte_pmd_snow3g) provides poll mode crypto driver support for utilizing Intel Libsso library, which implements F8 and F9 functions for SNOW 3G UEA2 cipher and UIA2 hash algorithms.

9.1. Features

SNOW 3G PMD has support for:

Cipher algorithm:

  • RTE_CRYPTO_CIPHER_SNOW3G_UEA2

Authentication algorithm:

  • RTE_CRYPTO_AUTH_SNOW3G_UIA2

9.2. Limitations

  • Chained mbufs are not supported.
  • SNOW 3G (UIA2) supported only if hash offset field is byte-aligned.
  • In-place bit-level operations for SNOW 3G (UEA2) are not supported (if length and/or offset of data to be ciphered is not byte-aligned).

9.3. Installation

To build DPDK with the SNOW3G_PMD the user is required to download the export controlled libsso_snow3g library, by requesting it from https://networkbuilders.intel.com/network-technologies/dpdk. Once approval has been granted, the user needs to log in https://networkbuilders.intel.com/dpdklogin and click on “Snow3G Bit Stream crypto library” link, to download the library. After downloading the library, the user needs to unpack and compile it on their system before building DPDK:

make snow3G

9.4. Initialization

In order to enable this virtual crypto PMD, user must:

  • Export the environmental variable LIBSSO_SNOW3G_PATH with the path where the library was extracted (snow3g folder).
  • Build the LIBSSO_SNOW3G library (explained in Installation section).
  • Set CONFIG_RTE_LIBRTE_PMD_SNOW3G=y in config/common_base.

To use the PMD in an application, user must:

  • Call rte_eal_vdev_init(“crypto_snow3g”) within the application.
  • Use –vdev=”crypto_snow3g” in the EAL options, which will call rte_eal_vdev_init() internally.

The following parameters (all optional) can be provided in the previous two calls:

  • socket_id: Specify the socket where the memory for the device is going to be allocated (by default, socket_id will be the socket where the core that is creating the PMD is running on).
  • max_nb_queue_pairs: Specify the maximum number of queue pairs in the device (8 by default).
  • max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default).

Example:

./l2fwd-crypto -c 40 -n 4 --vdev="crypto_snow3g,socket_id=1,max_nb_sessions=128"