examples/multi_process/symmetric_mp/main.c

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */

/*
 * Sample application demostrating how to do packet I/O in a multi-process
 * environment. The same code can be run as a primary process and as a
 * secondary process, just with a different proc-id parameter in each case
 * (apart from the EAL flag to indicate a secondary process).
 *
 * Each process will read from the same ports, given by the port-mask
 * parameter, which should be the same in each case, just using a different
 * queue per port as determined by the proc-id parameter.
 */

#include <stdio.h>
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
#include <stdarg.h>
#include <errno.h>
#include <sys/queue.h>
#include <getopt.h>
#include <signal.h>
#include <inttypes.h>

#include <rte_common.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_debug.h>
#include <rte_interrupts.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_memcpy.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
#include <rte_cycles.h>

#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1

#define NB_MBUFS 64*1024 /* use 64k mbufs */
#define MBUF_CACHE_SIZE 256
#define PKT_BURST 32
#define RX_RING_SIZE 1024
#define TX_RING_SIZE 1024

#define PARAM_PROC_ID "proc-id"
#define PARAM_NUM_PROCS "num-procs"

/* for each lcore, record the elements of the ports array to use */
struct lcore_ports{
    unsigned start_port;
    unsigned num_ports;
};

/* structure to record the rx and tx packets. Put two per cache line as ports
 * used in pairs */
struct port_stats{
    unsigned rx;
    unsigned tx;
    unsigned drop;
} __attribute__((aligned(RTE_CACHE_LINE_SIZE / 2)));

static int proc_id = -1;
static unsigned num_procs = 0;

static uint16_t ports[RTE_MAX_ETHPORTS];
static unsigned num_ports = 0;

static struct lcore_ports lcore_ports[RTE_MAX_LCORE];
static struct port_stats pstats[RTE_MAX_ETHPORTS];

/* prints the usage statement and quits with an error message */
static void
smp_usage(const char *prgname, const char *errmsg)
{
    printf("\nError: %s\n",errmsg);
    printf("\n%s [EAL options] -- -p <port mask> "
            "--"PARAM_NUM_PROCS" <n>"
            " --"PARAM_PROC_ID" <id>\n"
            "-p         : a hex bitmask indicating what ports are to be used\n"
            "--num-procs: the number of processes which will be used\n"
            "--proc-id  : the id of the current process (id < num-procs)\n"
            "\n",
            prgname);
    exit(1);
}


/* signal handler configured for SIGTERM and SIGINT to print stats on exit */
static void
print_stats(int signum)
{
    unsigned i;
    printf("\nExiting on signal %d\n\n", signum);
    for (i = 0; i < num_ports; i++){
        const uint8_t p_num = ports[i];
        printf("Port %u: RX - %u, TX - %u, Drop - %u\n", (unsigned)p_num,
                pstats[p_num].rx, pstats[p_num].tx, pstats[p_num].drop);
    }
    exit(0);
}

/* Parse the argument given in the command line of the application */
static int
smp_parse_args(int argc, char **argv)
{
    int opt, ret;
    char **argvopt;
    int option_index;
    uint16_t i, port_mask = 0;
    char *prgname = argv[0];
    static struct option lgopts[] = {
            {PARAM_NUM_PROCS, 1, 0, 0},
            {PARAM_PROC_ID, 1, 0, 0},
            {NULL, 0, 0, 0}
    };

    argvopt = argv;

    while ((opt = getopt_long(argc, argvopt, "p:", \
            lgopts, &option_index)) != EOF) {

        switch (opt) {
        case 'p':
            port_mask = strtoull(optarg, NULL, 16);
            break;
            /* long options */
        case 0:
            if (strncmp(lgopts[option_index].name, PARAM_NUM_PROCS, 8) == 0)
                num_procs = atoi(optarg);
            else if (strncmp(lgopts[option_index].name, PARAM_PROC_ID, 7) == 0)
                proc_id = atoi(optarg);
            break;

        default:
            smp_usage(prgname, "Cannot parse all command-line arguments\n");
        }
    }

    if (optind >= 0)
        argv[optind-1] = prgname;

    if (proc_id < 0)
        smp_usage(prgname, "Invalid or missing proc-id parameter\n");
    if (rte_eal_process_type() == RTE_PROC_PRIMARY && num_procs == 0)
        smp_usage(prgname, "Invalid or missing num-procs parameter\n");
    if (port_mask == 0)
        smp_usage(prgname, "Invalid or missing port mask\n");

    /* get the port numbers from the port mask */
    RTE_ETH_FOREACH_DEV(i)
        if(port_mask & (1 << i))
            ports[num_ports++] = (uint8_t)i;

    ret = optind-1;
    optind = 1; /* reset getopt lib */

    return ret;
}

/*
 * Initialises a given port using global settings and with the rx buffers
 * coming from the mbuf_pool passed as parameter
 */
static inline int
smp_port_init(uint16_t port, struct rte_mempool *mbuf_pool,
           uint16_t num_queues)
{
    struct rte_eth_conf port_conf = {
            .rxmode = {
                .mq_mode    = ETH_MQ_RX_RSS,
                .split_hdr_size = 0,
                .offloads = DEV_RX_OFFLOAD_CHECKSUM,
            },
            .rx_adv_conf = {
                .rss_conf = {
                    .rss_key = NULL,
                    .rss_hf = ETH_RSS_IP,
                },
            },
            .txmode = {
                .mq_mode = ETH_MQ_TX_NONE,
            }
    };
    const uint16_t rx_rings = num_queues, tx_rings = num_queues;
    struct rte_eth_dev_info info;
    struct rte_eth_rxconf rxq_conf;
    struct rte_eth_txconf txq_conf;
    int retval;
    uint16_t q;
    uint16_t nb_rxd = RX_RING_SIZE;
    uint16_t nb_txd = TX_RING_SIZE;
    uint64_t rss_hf_tmp;

    if (rte_eal_process_type() == RTE_PROC_SECONDARY)
        return 0;

    if (!rte_eth_dev_is_valid_port(port))
        return -1;

    printf("# Initialising port %u... ", port);
    fflush(stdout);

    retval = rte_eth_dev_info_get(port, &info);
    if (retval != 0) {
        printf("Error during getting device (port %u) info: %s\n",
                port, strerror(-retval));
        return retval;
    }

    info.default_rxconf.rx_drop_en = 1;

    if (info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
        port_conf.txmode.offloads |=
            DEV_TX_OFFLOAD_MBUF_FAST_FREE;

    rss_hf_tmp = port_conf.rx_adv_conf.rss_conf.rss_hf;
    port_conf.rx_adv_conf.rss_conf.rss_hf &= info.flow_type_rss_offloads;
    if (port_conf.rx_adv_conf.rss_conf.rss_hf != rss_hf_tmp) {
        printf("Port %u modified RSS hash function based on hardware support,"
            "requested:%#"PRIx64" configured:%#"PRIx64"\n",
            port,
            rss_hf_tmp,
            port_conf.rx_adv_conf.rss_conf.rss_hf);
    }

    retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
    if (retval < 0)
        return retval;

    retval = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
    if (retval < 0)
        return retval;

    rxq_conf = info.default_rxconf;
    rxq_conf.offloads = port_conf.rxmode.offloads;
    for (q = 0; q < rx_rings; q ++) {
        retval = rte_eth_rx_queue_setup(port, q, nb_rxd,
                rte_eth_dev_socket_id(port),
                &rxq_conf,
                mbuf_pool);
        if (retval < 0)
            return retval;
    }

    txq_conf = info.default_txconf;
    txq_conf.offloads = port_conf.txmode.offloads;
    for (q = 0; q < tx_rings; q ++) {
        retval = rte_eth_tx_queue_setup(port, q, nb_txd,
                rte_eth_dev_socket_id(port),
                &txq_conf);
        if (retval < 0)
            return retval;
    }

    retval = rte_eth_promiscuous_enable(port);
    if (retval != 0)
        return retval;

    retval  = rte_eth_dev_start(port);
    if (retval < 0)
        return retval;

    return 0;
}

/* Goes through each of the lcores and calculates what ports should
 * be used by that core. Fills in the global lcore_ports[] array.
 */
static void
assign_ports_to_cores(void)
{

    const unsigned int lcores = rte_lcore_count();
    const unsigned port_pairs = num_ports / 2;
    const unsigned pairs_per_lcore = port_pairs / lcores;
    unsigned extra_pairs = port_pairs % lcores;
    unsigned ports_assigned = 0;
    unsigned i;

    RTE_LCORE_FOREACH(i) {
        lcore_ports[i].start_port = ports_assigned;
        lcore_ports[i].num_ports = pairs_per_lcore * 2;
        if (extra_pairs > 0) {
            lcore_ports[i].num_ports += 2;
            extra_pairs--;
        }
        ports_assigned += lcore_ports[i].num_ports;
    }
}

/* Main function used by the processing threads.
 * Prints out some configuration details for the thread and then begins
 * performing packet RX and TX.
 */
static int
lcore_main(void *arg __rte_unused)
{
    const unsigned id = rte_lcore_id();
    const unsigned start_port = lcore_ports[id].start_port;
    const unsigned end_port = start_port + lcore_ports[id].num_ports;
    const uint16_t q_id = (uint16_t)proc_id;
    unsigned p, i;
    char msgbuf[256];
    int msgbufpos = 0;

    if (start_port == end_port){
        printf("Lcore %u has nothing to do\n", id);
        return 0;
    }

    /* build up message in msgbuf before printing to decrease likelihood
     * of multi-core message interleaving.
     */
    msgbufpos += snprintf(msgbuf, sizeof(msgbuf) - msgbufpos,
            "Lcore %u using ports ", id);
    for (p = start_port; p < end_port; p++){
        msgbufpos += snprintf(msgbuf + msgbufpos, sizeof(msgbuf) - msgbufpos,
                "%u ", (unsigned)ports[p]);
    }
    printf("%s\n", msgbuf);
    printf("lcore %u using queue %u of each port\n", id, (unsigned)q_id);

    /* handle packet I/O from the ports, reading and writing to the
     * queue number corresponding to our process number (not lcore id)
     */

    for (;;) {
        struct rte_mbuf *buf[PKT_BURST];

        for (p = start_port; p < end_port; p++) {
            const uint8_t src = ports[p];
            const uint8_t dst = ports[p ^ 1]; /* 0 <-> 1, 2 <-> 3 etc */
            const uint16_t rx_c = rte_eth_rx_burst(src, q_id, buf, PKT_BURST);
            if (rx_c == 0)
                continue;
            pstats[src].rx += rx_c;

            const uint16_t tx_c = rte_eth_tx_burst(dst, q_id, buf, rx_c);
            pstats[dst].tx += tx_c;
            if (tx_c != rx_c) {
                pstats[dst].drop += (rx_c - tx_c);
                for (i = tx_c; i < rx_c; i++)
                    rte_pktmbuf_free(buf[i]);
            }
        }
    }
}

/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
    uint16_t portid;
    uint8_t count, all_ports_up, print_flag = 0;
    struct rte_eth_link link;
    int ret;

    printf("\nChecking link status");
    fflush(stdout);
    for (count = 0; count <= MAX_CHECK_TIME; count++) {
        all_ports_up = 1;
        for (portid = 0; portid < port_num; portid++) {
            if ((port_mask & (1 << portid)) == 0)
                continue;
            memset(&link, 0, sizeof(link));
            ret = rte_eth_link_get_nowait(portid, &link);
            if (ret < 0) {
                all_ports_up = 0;
                if (print_flag == 1)
                    printf("Port %u link get failed: %s\n",
                        portid, rte_strerror(-ret));
                continue;
            }
            /* print link status if flag set */
            if (print_flag == 1) {
                if (link.link_status)
                    printf(
                    "Port%d Link Up. Speed %u Mbps - %s\n",
                        portid, link.link_speed,
                (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
                    ("full-duplex") : ("half-duplex"));
                else
                    printf("Port %d Link Down\n", portid);
                continue;
            }
            /* clear all_ports_up flag if any link down */
            if (link.link_status == ETH_LINK_DOWN) {
                all_ports_up = 0;
                break;
            }
        }
        /* after finally printing all link status, get out */
        if (print_flag == 1)
            break;

        if (all_ports_up == 0) {
            printf(".");
            fflush(stdout);
            rte_delay_ms(CHECK_INTERVAL);
        }

        /* set the print_flag if all ports up or timeout */
        if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
            print_flag = 1;
            printf("done\n");
        }
    }
}

/* Main function.
 * Performs initialisation and then calls the lcore_main on each core
 * to do the packet-processing work.
 */
int
main(int argc, char **argv)
{
    static const char *_SMP_MBUF_POOL = "SMP_MBUF_POOL";
    int ret;
    unsigned i;
    enum rte_proc_type_t proc_type;
    struct rte_mempool *mp;

    /* set up signal handlers to print stats on exit */
    signal(SIGINT, print_stats);
    signal(SIGTERM, print_stats);

    /* initialise the EAL for all */
    ret = rte_eal_init(argc, argv);
    if (ret < 0)
        rte_exit(EXIT_FAILURE, "Cannot init EAL\n");
    argc -= ret;
    argv += ret;

    /* determine the NIC devices available */
    if (rte_eth_dev_count_avail() == 0)
        rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n");

    /* parse application arguments (those after the EAL ones) */
    smp_parse_args(argc, argv);

    proc_type = rte_eal_process_type();
    mp = (proc_type == RTE_PROC_SECONDARY) ?
            rte_mempool_lookup(_SMP_MBUF_POOL) :
            rte_pktmbuf_pool_create(_SMP_MBUF_POOL, NB_MBUFS,
                MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE,
                rte_socket_id());
    if (mp == NULL)
        rte_exit(EXIT_FAILURE, "Cannot get memory pool for buffers\n");

    if (num_ports & 1)
        rte_exit(EXIT_FAILURE, "Application must use an even number of ports\n");
    for(i = 0; i < num_ports; i++){
        if(proc_type == RTE_PROC_PRIMARY)
            if (smp_port_init(ports[i], mp, (uint16_t)num_procs) < 0)
                rte_exit(EXIT_FAILURE, "Error initialising ports\n");
    }

    if (proc_type == RTE_PROC_PRIMARY)
        check_all_ports_link_status((uint8_t)num_ports, (~0x0));

    assign_ports_to_cores();

    RTE_LOG(INFO, APP, "Finished Process Init.\n");

    rte_eal_mp_remote_launch(lcore_main, NULL, CALL_MASTER);

    /* clean up the EAL */
    rte_eal_cleanup();

    return 0;
}